Hassan Ghassemi, Ph.D.

Associate Professor of Hydrodynamics

Department of Ocean Engineering

Amirkabir University of Technology (AUT)

Tehran Polytechnic

Hafez Ave., No 424, P.O. Box 15875-4413

Tehran, Iran

 

Email:

gasemi@aut.ac.ir    &     hmaaa2002@yahoo.com

Homepage:

http://www.aut.ac.ir/marinetech/ghasemi.htm 

Phone:

 

+(98-21) -64543112, Mobile: +98-912-3278423

Fax:

 

+(98-21)- 66412495

 

(Designed by Dr. Ghassemi)

Propeller is working in heavily loaded condition, isn't it?!

Conventional and AZIPOD Ship Propulsion Systems

(Software information is at the end of this page)

 

Brief biography: I have been graduated from high school in Physics mathematics in 1982, then admitted to the Sharif University of Technology  (SUT) in 1983 in Mechanical Engineering and graduated B.Sc in 1988. After, I worked about two years in Mahmoudabad Petroleum Institute during 1988-90.  To continue and progress my knowledge, I departed to abroad and graduated  M.Sc.  of Naval Architecture in 1993  and Ph.D. of Naval Architecture and and Ocean Engineering from Yokohama National University (YNU), Japan, in 1997.  Then, I worked at IHI co. (IshikawajimaHarima Heavy Industries) in 1997-98. I also spent two years post-doctoral fellow at Memorial University of Newfoundland (MUN), in Canada during 1998-2000. I joined to Amirkabir University of Technology (AUT) from October 2000. Currently, I am Deputy for Research Affairs of Department of Ocean Eng. from June 2010.

 

 

Academic Qualification

 

Job Experience

        Instructor at Mahmoudabad Petroleum Institute (MPI),, Iran, 1990-91.

        Assistant Researcher at Research Institute of IHI Company , Japan, 1997-98.

        Visiting Fellow at YNU, Japan, 1998.

        Technical Consultant at Iran Marine Industries,

 

Lectured Courses (for Under and Graduate Students)

        Advanced Fluid Mechanics,

        Boundary Element Method (BEM),

        Aero-Hydrodynamics,

        Advance Marine Propulsor Design,

        Design of High Speed Craft,

        Ship Hydrodynamics I, II

        Ship Hydrostatics (Buoyancy and Stability),

        Vibration Theory

        Dynamic

        Fluid Mechanics Lab,

        Short Term on Hydrodynamics & Propulsor System        40 Hours

        Short Term on Boundary Element Method  (BEM)            20 Hours

Editorial Board of Journal

       Journal of OEI (Oceanic Engineering International), Canada

        Journal of IRANAME (Iranian Journal of Naval Architecture and Marine Engineering)

        Int. Journal of CFD (Japan)

 

Advisors of Some Offered Themes

 Some of Graduate Projects:

        Design of Water-Jet Propulsion System for High Speed Craft,

        Hydrodynamic Analysis on Kort-Nozzle Propeller by Surface Panel Method,

        Computations of Hydrodynamic Loads on Hovercraft Vehicle

        Calculations of the Intact Stability of Ships Using a Software Preparation

        Design of Fin Stabilizer for the Ship

        Design of Water-Jet Propulsion System

        Computations of Semi-Planing Hull Surface by Boundary Element Method

 

Some of Under-Graduate Projects:

 

        A Study on MHD Propulsion System,

        Practical Computations of Ship Resistance by HMRC,

        Computation of Hydrodynamic Forces on Hydrofoil by Panel Method,

        A Study on Detrimental Effect of Cavitation on Marine Vehicles,

        Assessment of Various Types of Propulsor on Marine Vehicles

        Design of Ship by Practical Equation

        Analysis and Effect of Wake Flow on Cavitation and Vibrations

        A Study and Analysis of the Stabilizer of the Passenger Ship

        Design of Fishing Vessel based on FAO Requirements

        Hydrodynamic and Vibration Analysis of the Ship Propeller

  • Up to now, I did as supervisor to students more than 150 undergraduate, 40 MSc and 3 PhD.
  • I am supervisor of some PhD students (Shamsi, Farahbakhsh, Yari, Dehghanian, Zakerdoost).
  • Dr. Kohansal has garduated and He is working at Persian Gulf University (PGU)

     

    Research Interest

     

    Published (Journal Papers) - Most of these papers can be downloaded

    1. Ghassemi, H., Ikehata,M. , Yamazaki, H.: An Investigation of Wake Models And Its Effects on Hydrodynamic Performance of Propeller by Using of Surface Panel Method, Journal of Society of Naval Architects of Japan, Vol. 178, 1995.
    2. Ghassemi, H.,  Ikehata,M.,  Yamazaki, H. : A Verification of Cavity Model for Partially two-Dimensional Hydrofoil, Journal of Kansai Society of Naval Architects of Japan, Vol. 227, 1996. Pdf file (at Journal site)
    3. Ghassemi, H., Allievi, A.: A Computational Method for the Analysis of Fluid Flow and Hydrodynamic Performance of Conventional and Podded Propulsion Systems, Journal of Oceanic Engineering International, Vol. 3, No. 2, 1999.
    4. Ghassemi, H.: Hydrodynamic Performance of Marine Propeller in Non-Uniform Wake Flows, Memorandum Paper at IMD/NRC, 2000.
    5. Ghassemi, H.: Boundary Element Method Applied to the Three-Dimensional Cavitating Hydrofoil and Marine Propeller, International Journal of Science and Technology (Scientia Iranica), Vol. 10, 2003. Pdf file
    6. Ghassemi, H.: Hydrodynamic Characteristics of Marine Propellers in Steady and Unsteady Wake Flows, Journal of Science and Technology of AmirKabir, Vol. 10, No 54-B, 2003. Pdf file (at Journal site)
    7. Ghassemi, H.: Boundary Element Method Applied to the Cavitating Hydrofoils and Marine Propeller, Journal of Oceanic Engineering International, Vol.7, No. 2, 2003. ()
    8. Ghassemi, H.: Design of Ship Propeller by the Systematical Algorithm and Boundary Element Method, Iranian Journal of Science and Marine Technology (IRANAME), Vol. 1 No. 1, 2004. Pdf file .
    9. Ghassemi, H.: Boundary Element Method Applied to Marine Propeller Design, Journal of Engineering, Mazandaran University, Vol. 2, No. 4, 2004.
    10. Ghassemi, H., Shahifar, H.R.: تحلیل عددی نیروهای پسا و برا وارد بر بدنه ی زیرسطحی بدون سرنشین , Vol. 5, No. 1, 2006. مجله علمی پژوهشی مهندسی دریا. Pdf file (at Journal site)
    11. Ghassemi, H., Shahifar, H.R.: محاسبات درگ موج سازی شناور زیرسطحی , Vol. 6, No. 2, 2007. مجله علمی پژوهشی مهندسی دریا Pdf file (at Journal site) .
    12. Ghassemi, H., Ghadimi, P.: Computational Hydrodynamic Analysis of the Propeller-Rudder and the AZIPOD Systems, Ocean Engineering , Vol. 35, No. 1, 2008. Pdf file .
    13. Ghassemi, H., Ghiasi, M.: A Combined Method for the Hydrodynamic Characteristics of Planing Crafts, Ocean Engineering , Vol. 35, No. 3-4, 2008. Pdf file (at Journal site) .
    14. Ghassemi, H., Iranmanesh, M.: Comparison Of Hydrodynamic Characteristics On Two Ship Propulsors (PRS And Azipod), Iranian J. of Science and Technology, , Vol. 32, Sept., 2008. Pdf file (at Journal site)) .
    15. Ghassemi, H., Yu-Min Su : Determining the hydrodynamic forces on a planning hull in steady motion, J. of Marine Science and Application, Harbin Technical University (Springer Publications), Vol. 7, Sept., 2008 Pdf file .
    16. Ghassemi, H.: Effect of the Wake Flow and Skew Angle onto the Hydrodynamic Performance of Ship Propeller Journal of Science and Technology (Scientia Iranica), Vol. 16, No. 2, 2009. Pdf file .
    17. Ghassemi, H., Kohansal A.R., , Ghiasi M.: Numerical Prediction of Induced Pressure and Lift of the Planing Surfaces , An Int. Journal of China Ocean Engineering , Vol. 23, No. 2, 2009. Pdf file (at Journal site) .
    18. Ghassemi, H.: Hydrodynamic Performance of Coaxial Contra-Rotating Propeller (CCRP) for Large Ships , Polish Maritime Research, , Vol. 16, No.1 , 2009. Pdf file (at Journal site) .
    19. Ghassemi, H., KohansalA.R.: Numerical evaluation of various levels of singular integrals, arising in BEM and its application in hydrofoil analysis , Applied Mathematics & Computation, , Vol.213, No. 2, 2009, pp277-289. Pdf file (at Journal site) .
    20. Ghassemi, H., Iranmanesh M., Ardshir, A.: Simulation of free surface wave pattern due to the moving bodies, Iranian Journal of Science and Technology, , Iranian Journal of Science & Technology, Transaction B: Engineering, Vol. 34, No. B2, pp 117-134, 2010. Pdf file .
    21. Ghassemi, H.: Hydrodynamic characteristics of the surface-piercing propeller for the planing craft , Journal of Marine Science and Application , Vol. 8, No. 4, 2009. Pdf file .
    22. Ghassemi, H., Kohansal A.R.: Hydrodynamic Analysis of the Non-planing and Planing Hulls by the Boundary Element Method, Scientia Iranica (Journal of Marine Science and Technology) , Transaction B: Mechanical Engineering Vol. 17, No. 1, 2010.Pdf file .
    23. Ghassemi, H., Ghiasi, M.: A numerical modeling of hydrodynamic characteristics of various planing hull forms, Ocean Engineering , Volume 37, Issues 5-6, April 2010, Pages 498-510 Pdf file (at Journal site) .
    24. Ghassemi, H., Zamanian, S.J.,: Computations of the wave-making resistance of a UV using boundary element method, Jouranl of Aerospace and Mechanics, Vol.5, No.1, 2009, Pdf file (at Journal site) .
    25. Ghassemi, H., Kohansal A.R.: Isoparametric boundary element method applied to the rectangular and delta hydrofoils near the free surface China ocean engineering, Vol. 24, No. 2, pp. 1-11. Pdf file (at Journal site) .
    26. Ghassemi, H., Husseini Dadmarzi, F., Ghadimi, P., Ommani, B.: Neural network-PID controller for roll fin stabilizer, Polish Maritime Research, accepted, in press, 2010, Pdf file (at Journal site) .
    27. FarahbakhshI., Ghassemi, H.: Numerical investigation of the Lorentz force effect on the vortices transfiguration in a two-dimensional lid-driven cavity, Proc. IMechE Vol. 224 No. 6, Part C: J. Mechanical Engineering Science, 2010. Pdf file (at Journal site) .
    28. Ghassemi H., Kohansal, A.R, Ghiasi, M.: Hydrodynamic Characteristics of Three-Dimensional Planing Surfaces, Including Wave Effects Analysis, Turkinsh J. of Eng. and Environmental Sciences, Vol. 34, 2010, pp.155-170. Pdf file (at Journal site) .
    29. Ghassemi H., Sayebani, M.: تحلیل و عملکرد پروانه اسکیودار و تعیین قدرت رانش زیردریایی با روش المان مرزی, Amirkair Journal of Science and Technology, Vol, 41, No. 4, Mechanics, 2010. , Pdf file (at Journal site) .
    30. Ghassemi H., Nazari, H., Ghassabzadeh, M.: عملکرد هیدرودینامیکی پروانه های نیمه مغروق با استفاده از روش المان مرزی, To be accepted at Sharif Journal of Science and Technology, in press 2010. Pdf file (at Journal site) .
    31. Ghassemi H., Kohansal, A.R.: Boundary element method (BEM) applied to the lifting bodies near the free surface, J. of Marine Engineering, Vol.7, No.1, Fall & Winter 2010.Pdf file (at Journal site) .
    32. Ghassemi H., Ghiasi, M.: تحليل هيدروديناميكي سيستم پيش برنده پروانهاي براي يك شناور زيرسطحي, To be accepted at Mashad Unversity Journal of Science and Technology, Vol 21, 1389, No. 2. Pdf file (at Journal site) .
    33. Ghassemi H., Yari, E.,: The Added Mass Coefficient computation of sphere, ellipsoid and marine propellers using Boundary Element Method, Polish Maritime Research, Vol.18, 1(68), 2011. Pdf file (at Journal site) .
    34. Ghassemi H., Mansouri, M., Zaferanlouei, S.: Interceptor hydrodynamic analysis for handling trim control problems in the high-speed crafts, Proc. IMechE Vol. 225 Part C: J. Mechanical Engineering Science, Nov. 2011 (No. 11). Pdf file (at Journal site) .
    35. Ghassemi H., Ghadimi, P.: Numerical Analysis of the High Skew Propeller of an Underwater Vehicle, J. Marine Sci. Appl. (2011) 10: pp.289-299. Pdf file (at Journal site) . .
    36. Ghassemi, H., Sayehbani, M.,: تحلیل و عملکرد پروانه اسکیودار و تعیین قدرت رانش زیردریایی با روش المان مرزی , Amirkabir Journal, Vol 44, No. 1, 1391 Pdf file (at Journal site) .
    37. Ghassemi H., Ghadimi, P.: Hydrodynamic Efficiency Improvement of the High Skew Propeller for the Underwater Vehicle Under Surface and Submerged Conditions, J. Ocean Univ. China (Oceanic and Coastal Sea Research, ISSN 1672-5182, 2011 10 (4): 314-324. Pdf file (at Journal site) .
    38. Ghassemi H., Mardan, A., Ardeshir, A.,: Numerical Analysis of Hub Effect on Hydrodynamic Performance of Propellers with Inclusion of PBCF to Equalize the Induced Velocity, POLISH MARITIME RESEARCH 2(73) 2012 Vol 19; pp.17-24. Pdf file (at Journal site) .
    39. Ghassemi H., Saryazdi, M. Gh., Ghassabzadeh, M.,: Influence of the skew angle on the hydroelastic behaviour of a composite, marine propeller, Proc IMechE Part M: J Engineering for the Maritime Environment, Vol. 226 (4), 2012. Pdf file (at Journal site) . .
    40. Farahbakhsh I.,Paknejad,A., Ghassemi, H.,: Numerical simulation of 2-D laminar flow subjected to Lorentz force effect in a channel with backward-facing step, Journal of Mechanical Science and Technology (2012). Pdf file (at Journal site) . .
    41. Ghassabzadeh M., Ghassemi, H.,: Automatic Generation of the Planing Tunnel High Speed Craft Hull Form, Journal of Marine Science and Application (JMSA) (2012), will appear Pdf file (at Journal site) .
    42. Ghassemi, H. Yari, E., تحلیل عددی کاویتاسیون لایهای روی پروانه با استفاده-از روش المان مرزی بر پایه جریان پتانسیل , ، Vol 9, No 1, 1392, مجله مکانیک هوا فضا Pdf file (at Journal site) .
    43. Ghassemi, H. Mardan M., Yari, E.,: تحليل عددی اثر توپی بر عملکرد پروانه شناور و استفاده از جهت يکسانسازي سرعتهای القايي در جریان پایین دست ،Vol 32 No. 1, 1392,مجله روشهای عددی در مهندسی (استقلال) دانشگاه صنعتی اصقهان will appear Pdf file (at Journal site) .
    44. Ghassabzadeh M., Ghassemi, H.,: An Innovative Method for Parametric Design of Planing Tunnel Vessel Hull Form , Ocean Engineering (2013), Pdf file (at Journal site) .
    45. Damanpack A.R., Bodaghi, M., Ghassemi, H., Sayehbani, M.,: Boundary element method applied to the bending analysis of thin functionally graded plates, Latin Amer Journal of Solids and Structure, 2013, will appear Pdf file (at Journal site) .
    46. Ghassabzadeh, M., Ghassemi, H., Saryazdi, M. Gh.,: Determination of the hydrodynamics characteristics of marine propeller using hydro-elastic analysis, Journal of Brodogradnja, Vol. 64 (1), 2013, Pdf file (at Journal site)
    47. Ghassemi, H., Kohansal. A.R.,: Wave Generated by the NACA4412 Hydrofoil near Free Surface , J. of Applied Fluid Mechanics (JAFM), 2013, Pdf file (at Journal site) .
    48. Khosravi. M.,Ghassemi, H.,: Effect of hull form coefficients on the vessel Sea-keeping performance , J. of Marine Science and Tech. (Taiwan), in press, 2013 Pdf file (at Journal site) .
    49. Shamsi, R., Ghassemi, H., ,: Hydrodynamic Analysis of Puller and Pusher of AZIPOD at Various Yaw Angles , Proc IMechE Part M:J Engineering for the Maritime Environment, 2013, Pdf file (at Journal site) .
    50. Shamsi, R., Ghassemi, H.: Numerical Investigation of Yaw Angle Effects on Propulsive Characteristics of Podded Propulsors, Int. J. of Nav. Arch & Ocean Eng, 2013, underr review and revised, Pdf file (at Journal site) .
    51. Mehdi Nazari, Hassan Ghassemi, Mahmoud Ghiasi and Mesbah Sayehbani.: Design of the Point Absorber Wave Energy Converter for Assaluyeh Port, Iranica, J. of Energy & Environment, 2013, Pdf file (at Journal site) .
    52. Ghassemi, H., Taherinasab, M., ,: Numerical calculations of the hydrodynamic performance of the CRP for high speed vehicle , Polish Maritime Research, Vol. 20(2), 2013, Pdf file (at Journal site) .
    53. Ghassemi, H.,Mardan ,A., Ardshir, A., ,: PBCF effect on Ship Propellers, The Naval Architect, to be appear in July/Aug. 2013, Pdf file (at Journal site) .
    54. Zakerdoost, H., Ghassemi, H., Ghiasi, M.,: Ship hull form optimization by evolutionary algorithm in order to diminishing the drag, J. of Marine Sci & Applicatiom Vol.12, No. 2, 2013, Pdf file (at Journal site) .
    55. Zakerdoost, H., Ghassemi, H., Ghiasi, M.,: An evolutionary optimization technique applied to resistance reduction of the Ship hull form, Journal of Naval Architecture and Marine Engineering, Vol 10, No.1, 2013, Pdf file (at Journal site) .
    56. Ghassabzadeh. M., Ghassemi, H., Delkhosh A., ,: Numerical Simulations of Multi-hull vessel, J. of Marine Science and Tech, under review, 2013, Pdf file (at Journal site) .
    57. Ghassemi, H., Ghassabzadeh. M., Saryazdi, M., : Effect of Material on Hydro-elastic Behavior of Marine Propeller Using Hybrid Software BEM-FEM, Polish Maritime Research, in press, 2013, Pdf file (at Journal site) .
    58. Shamsi, R., Ghassemi, H., Molyneux, D., Liu P., : Numerical Hydrodynamic Evaluation of Propeller (with Hub Taper) and Podded Drivein Azimuthing Conditions, Ocean Engineering, under review, 2013, Pdf file (at Journal site) .
    59. Tarbiat, S., Ghassemi, H., ,: Numerical prediction of hydro-mechanical behaviour of controllable pitch propeller , Transactions of FAMENA, under review, 2013, Pdf file (at Journal site) .

     

    Published Papers (National and International Conference)

    1. Ghassemi, H.:  Laboratory notebooks for Strength of Materials and Fluid Mechanics at Mahmaoudabad Petroleum InstituteI, 1990.
    2. Ghassemi, H.: Creep Phenomenon on Refinery, Technical Bulletin of Iran Petroleum Institute, 1991.
    3. Ghassemi, H.: Stress-Train Analysis of Cantilever Beam with T Sections, Technical Bulletin of Iran Petroleum Institute, 1991.
    4. Ghassemi, H. and  Krempa, J.: Design of Fishing Vessel for Specific Application, Gdansk Technical University Bulletin, 1993.
    5. Ghassemi, H. and Tsutsumi, T.: Hydrodynamic Performance of Propeller-Rudder System (PRS) in Uniform and Non-Uniform Conditions, Technical Report at Research Institute of IHI, 1998.
    6. Ghassemi, H.: Free Surface Effects on Propeller-Rudder System, Final Report for Visiting Research at YNU, 1998.
    7. Ghassemi, H.: Hydrodynamic Performance of Conventional and Podded Propulsion Systems, International Conference on Mechanical Engineering  (ISME2000), Tehran, Iran.
    8. Ghassemi, H., M.D. Karim, and M. IKehata: Non-Linear Method Applied to Partially Cavitating Three Dimensional Hydrofoils, Fourth International Conference on Hydrodynamics (ICHD2000), Yokohama, Japan.
    9. Ghassemi, H.: Analysis of Hydrodynamic Loads Applied to the Hovercraft, Journal of Pajohsh-Yar, No. 13, November 2000.
    10. Ghassemi, H.: Shipbuilding Industries in Korea, Japan and Potential Capability in Iran, 2nd Conference on Iranian Marine Industries, Dec. 2000.
    11. Ghassemi, H.: Assessment of Marine Industries Software, Journal of Pajohsh-Yar, No. 16, June 2001.
    12. Ghassemi, H.: Various Types of New Design for Marine Vehicles, 3rd Conference on Iranian Marine Industries, Dec. 2001.
    13. Ghassemi, H. and R. Goodarzi: Design of Foil Type of Stabilizers for the Passenger Ship, 4th Conference on Iranian Marine Industries, Dec. 2002.
    14. Ghassemi, H.: Boundary Element Method Applied to the Cavitating Hydrofoil, International Conference on Mechanical Engineering  (ISME2003), Mashad, Iran.
    15. Ghassemi, H.: Hull Surface Generation by NURBS Method, 5th Conference on Iranian Marine Industries, Dec. 2003.
    16. Ghassemi, H.: Calculations of Wave-Making Resistance of Marine Vehicle, 5th Conference on Iranian Marine Industries, Dec. 2003.
    17. Ghassemi, H. : Analysis of Hydrodynamic Performance of Propellers in Unsteady Wake Flows,  International Conference on Mechanical Engineering  (ISME2004), Tehran, Iran.
    18. H.  Ghassemi : Design of Marine Propeller by Boundary Element Method,  International Conference on Mechanical Engineering  (ISME2004), Tehran, Iran.
    19. Ghassemi, H. and M. Jafarzadeh-Khatibani: Regression Analysis of Hydrostatics of Marine Vessels ,  International Conference on Mechanical Engineering  (ISME2004), Tehran, Iran.
    20. Ghassemi, H. : Analysis of Wave-Making Resistance of Underwater Vehicle,  International Conference on Mechanical Engineering  (ISME2004), Tehran, Iran.
    21. Ghassemi, H. and M. Mazinani: Design of Water-Jet Prolusion System,  International Conference on Mechanical Engineering  (ISME2004), Tehran, Iran.
    22. Ghassemi, H.: Hydrodynamic Performance of Marine Propeller in Cavitating Flow, 6-th International Conference on Hydrodynamics (ICHD2004), Australia.
    23. Ghassemi, H., Shahifar,: Calculations of Lift and Drag for Underwater marine vehicle by Fluent Software,6th Conference on Iranian Marine Industries, Dec. 2004.
    24. Ghassemi, H, Valizadeh, V., Hossei, Iraj,: Numerical Calculations of Resistance of AUV , 6th Conference on Iranian Marine Industries, Dec. 2004.
    25. Ghassemi, H., A. Rahmanian: Numerical Computations of Lift and Drag for High Speed Planing Craft by CFD, ISME2004, Isfahan-Iran.
    26. Ghassemi, H., H. Fadavi, Y. Rezanejad: Numerical Calculations of Hydrodynamic Forces on Submerged Ellipsoid Shape, ISME2005, Isfahan-Iran. (Accepted)
    27. Ghassemi, H., A. Alizadeh: Numerical Analysis of Control Trim for Planing Craft, ICFS2005,  Shiraz, Iran.
    28. Ghassemi, H., A. Rahmainan, V. Alizadeh: Computational Analysis of Hydrodynamics Characteristics of Planing craft, International Conference on Fast Ship  ICFS2005, Shiraz, Iran.
    29. Ghassemi, H., M. Panahi: Simple Method for Drag Reduction of WIG and its Ground Effect, ICFS2005, Shiraz, Iran.
    30. Ghassemi, H., A. Rahmani, M.R. Khedmati: Practical Hydromechanics Calculations of Planing Craft in Steady Motion,   ICFS2005, Shiraz, Iran.
    31. Ghassemi, H., B. Rajabi: Marine Propeller Design for Iran-Prorozi Vessel,  ICFS2005,  ICFS2005, Shiraz, Iran.
    32. Ghassemi, H., H. Forouzan, Alizadeh, V, Etemaddar, M.: Design of Propulsion Systems for High Speed Crafts, ICFS2005 , Shiraz, Iran.
    33. Ghassemi, H.:صنعت كشتي سازي در ژاپن و كره و ظرفيت پتانسيلي آن در ايران, دومين همايش ملي صنايع دريايي ايران، 1379 تهران.
    34. Ghassemi, H.:طرح هاي نوين ماشين هاي دريايي, سومين همايش ملي صنايع دريايي ايران، 1380 تهران.
    35. Ghassemi, H.:عملكرد هيدروديناميكي پيش برنده از نوع پروانه اي در شرائط جريان ويك, سومين همايش ملي صنايع دريايي ايران، 1380 تهران.
    36. Ghassemi, H.و Goodarzi, R.,:طراحی باله هاي پايداركننده غلتش عرضي كشتي, چهارمين همايش ملي صنايع دريايي ايران، 1381 تهران.
    37. Ghassemi, H., Alizadeh, V.:فرآیند و چگونگی تحلیل عددی پروانه کشتی با استفاده از روش المان مرزی, هفتمين همايش ملي صنايع دريايي ايران، 1384 تهران.
    38. Ghassemi, H., Forouzan, H.:تحلیل عددی سیستم رانش واتر جت دوقلوی موازی برای شناور کاتاماران, هفتمين همايش ملي صنايع دريايي ايران، 1384 تهران.
    39. Etemaddar, M., Ghassemi, H., Ketabdari, M.J.:تحلیل عددی انتگرالهای تابع گرین با استفاده از دو روش گوس و گرین در المان مرزی , هفتمين همايش ملي صنايع دريايي ايران، 1384 تهران.
    40. Bakhshandeh, A., Ghassemi, H., Jafar Kazemi, F.:بررسی مقاطع مختلف ايرفويل بر خواص آئروديناميکي در نزديکي سطح , نهمين همايش ملي صنايع دريايي ايران، 1386 نور- مازندران.
    41. Ghassemi,H. Kohansal, A.R., Jeddi, R.:روش عددي المان مرزي براي محاسبه فشار هيدروديناميکي در شناورهاي پلنينگ , نهمين همايش ملي صنايع دريايي ايران، 1386 نور- مازندران.
    42. Ghassemi,H. Poorshams, D.: بررسي و محاسبات نيروهای ليفت و درگ هیدروآئرودینامیکی شناور ویگ از لحظة شروع حركت تا پروازي كامل , نهمين همايش ملي صنايع دريايي ايران، 1386 نور- مازندران.
    43. Ghassemi, H. , Rostami, M. : تحليل هيدروديناميکي شناورهای سرعت بالا در جریانهای مغشوش و ناپايدار , نهمين همايش ملي صنايع دريايي ايران، 1386 نور- مازندران.
    44. Riazi, M. Ghassemi H., Ghiasi M.:محاسبه مقاومت موج سازي شناور سوآث بر اساس تئوری توسعه یافته معادله انتگرال میشل , نهمين همايش ملي صنايع دريايي ايران، 1386 نور- مازندران.
    45. Ghassemi H. Ghamari. I. :شبیه سازی الگوی امواج توليد شده ناشی از حرکت اجسام سه بعدی ,دههمين همايش ملي صنايع دريايي ايران، 1387 آبادان و خرمشهر.
    46. Ghassemi H. Hassanvand, M., Ghiasi, M. :بکارگیری روش المان مرزی برای عملکرد هیدرودینامیکی پروانه های سطحی ,دههمين همايش ملي صنايع دريايي ايران، 1387 آبادان و خرمشهر.
    47. Ghassemi H. Jeddi, R. :تئوری کلوین و بکارگیری روش المان مرزی برای تحلیل هیدرودینامیکی شناورهای پلنینگ با بدنه تخت ,دههمين همايش ملي صنايع دريايي ايران، 1387 آبادان و خرمشهر.
    48. Ghassemi H. Mohseni, M. , Hassan, E.:روش عددي توسعه يافته المان پره براي تحليل هيدروديناميکي پروانه کشتي ,دههمين همايش ملي صنايع دريايي ايران، 1387 آبادان و خرمشهر.
    49. Ghassemi H. Shademaqni, R. , Sayehbani, M.:طراحی بهینه سیستم رانش دو پروانه سری با چرخش معکوس برای شناورهای بزرگ ,دههمين همايش ملي صنايع دريايي ايران، 1387 آبادان و خرمشهر.
    50. Husseini dadmarzi, F., Ghassemi H. Ghadimi, P. :مدل سازی شبکه عصبی نيروی باله های پايدار کننده شناور در حرکت غلتش عرضی ,دههمين همايش ملي صنايع دريايي ايران، 1387 آبادان و خرمشهر.
    51. Ghassemi H. Ghamari. I. :شبیه سازی الگوی امواج توليد شده ناشی از حرکت اجسام سه بعدی ,دههمين همايش ملي صنايع دريايي ايران، 1387 آبادان و خرمشهر.
    52. Ghassemi H. Alizadeh, V. :Practical Design Of Propulsor Systems For High-Speed Craft, International Conference In Marine Hydrodynamics 2006 India-2006.
    53. Ghassemi H. ::روش المان مرزي برای طراحي پروانه كشتي, ISME2004 Tehran, IRAN.
    54. Ghassemi H. Jafarzadeh KhatibaniM.::تعيين پايداري شناورهاي تجاري در مرحله اوليه طراحي با استفاده از آناليز رگراسيوني , ISME2004 Tehran, IRAN.
    55. Ghassemi H. ::Analysis of Hydrodynamic Performance of Propellers in Unsteady Wake Flows , ISME2004 Tehran, IRAN.
    56. Ghassemi H. ::مقاومت موج سازی شناور زيرآبی با استفاده از روش المان مرزی , ISME2004 Tehran, IRAN.
    57. Ghassemi H. Mazinani, M.::تحليل و محاسبات واترجت برای شناورهای تندرو , ISME2004 Tehran, IRAN.
    58. Ghassemi H. Tahmasvand, H.::Hydrodynamic Simulations of Non-Cavitating and Super-Cavitating Propellers, ISME2004 Tehran, IRAN.
    59. Ghassemi H. Zare, M.::بررسي تجربی و محاسباتی يك هيدروفويل در نزديكی سطح آزاد آب, ISME2006 Tehran, IRAN.
    60. Ghassemi H. Yousefnejad, R.::Various aspects of propulsor types for high speed craft, International Conference on Hydrodynamics (ICHD2006) Italy, Napoli, Ischia-2006.
    61. Ghassemi H. Yousefnejad, R. : :Numerical hydrodynamic analysis of planing hull surface International Conference on Hydrodynamics (ICHD2006) Italy, Napoli, Ischia-2006.
    62. Ghassemi H. :Hydrodynamic Performance of the Modern Ship Propulsion System, ISME2008, Kerman, Iran, 2008.
    63. Ghassemi H., Rahmanian, A.:Hydrodynamic Analysos of Planing Craft, 16th International Conference HYDMAN05, 2005, Poland, Gdansk.
    64. Ghassemi H. :Hydrodynamic Performance of Coaxial Contra-Rotating Propeller (CCRP) for Large Ships, ISME2008, Kerman, Iran, 2008.
    65. Ghassemi H. Ghiasi, M, Ghamari, I. :Nonlinear Generated Wave Pattern due to a Three Dimensional Moving Bodies, International Conference on Hydrodynamics (ICHD2008) Nantes, France-2008.
    66. Ghassemi H. Ghiasi, M. :Hydrodynamic Characteristics of the Surface Piercing Propeller (SPP) by Using Special Practical and Numerical Approach International Conference on Hydrodynamics (ICHD2008) Nantes, France, 2008.
    67. ... etc, Many papers published in the conf., I do not put here! I will add later on!.

    Published Papers (National Maritime Magazine)

    1. Ghassemi, H.: How to Develop the Shipbuilding Industries, Journal of Port & Sea, No, 80, 2000.

    2. Ghassemi, H.: Train Ships Similar to Sea Snake, Journal of Port & Sea, No, 81, 2001.

    3. Ghassemi, H.: Modern Wind Ships, Journal of Port & Sea, No, 82, 2001.

    4. Ghassemi, H.: Fast Transportation of Marine Vehicles, Journal of Port & Sea, No, 83, 2001.

    5. Ghassemi, H.:  Hydro-Electro-Magnetic Propulsion System, Journal of Marine Science, Noushar, No. 14, 2001.
    6. Ghassemi, H.: Stabilizer Systems of Ship, Journal of Port & Sea, No, 84, 2002.
    7. Ghassemi, H.: Composite Materials in Marine Vehicles, Journal of Port & Sea, No, 84, 2002.

     

     

    Membership in Learned Societies

     

    Also, member of the following magazines:

    Some of my Interested links

     

  • World WWW sites related to Naval Architecture & Ocean Engineering (NAOE)

  • Ocean Engineering Research Centre of MUN, Canada

  • Canadian Institute of Marine Engineering,

  • CFD-on line

  • CFD Code List,

  • CFD WWW home pages list,

  • Naval Surface Warfare Center,

  • Department of Marine Technology, NTNU

  • Ship Technology, UK.

  • ITTC

  • HSVA, Germany

  • SRI, Japan,

  • AMC, Australia

  • International Maritime Organization - IMO Home Page,

  • DNV, Norway,

  • Cavitation Homepage, USA

  • IACS (The International Association of Classification Societies), UK.

  • Maritime News,

  • Analytical Methods, USA

  • SNAME, USA

  • Maritime Industry Information

  • MARINTEK, Norway

  • All Universities over the World

  •  

    Software Code

    SPD=Ship Propeller Design (Price: ...)

    (This software code is almost 8 years effort of my work in Japan and Canada).

    • Modeling and Mesh Generation for all Configuration Bodies

    • Propeller Design for Large Vessels and Small High Speed Crafts

    • Computations of Propeller Hydrodynamics Coefficients
    • Uniform/Non-Uniform and Steady/Unsteady Flow
    • Propeller-Rudder Interactions
    • Cavitation Effect

     

    HSC=High Speed Craft (Price: ....)

    • Mesh Generation on Craft Surface by Mathematical Model

    • Calculations of Drag of  Small High Speed Crafts

    • Hydrodynamics Lift and Drag Coefficients

    • Viscous Drag by Boundary Layer Modeling

     

    Mesh Generation (Price: ...)

    If you want to purchase these software, please contact me on above address.   

    BEM Book (pdf file), click Here

     

     

    Updated: May 2013.

    __________________________________________________________________________________________________________________